Pool cleaning

Swimming pool cleaning: a deep clean that protects the finish.

Scale, staining and built-up residue make a pool look tired long before the tiles fail. We clean tiled pools with a method chosen for the actual contamination and the materials in your pool, then extract thoroughly so nothing is left behind in the joints.

What we lift

The build-up that dulls a pool

Every pool collects something different. We look first, then choose the cleaner, the dilution and the agitation to suit what is actually there.

  • Calcium scale and mineral deposits on tile faces and joints
  • Rust marks, staining and discolouration
  • Dirt and residue in grout lines, channels and corners
  • Residue or haze left on tile faces
  • Deposits around steps, edges and outlets
The build-up that dulls a pool
Why method matters

The right chemical clean for the job

Every chemical clean starts with what the job is. Taking out old grout ready for new joints, lifting calcium scale, shifting rust marks, cleaning a pool surround or giving the whole pool a general clean each call for a different product.

We use the correct chemical for that job, at the right dilution and contact time, so the dirt comes off without harming the existing grout or the tile finish. We check the tile and grout first, follow the product instructions and site safety requirements, and try a small test area before the full clean.

The right chemical clean for the job
Part of a bigger job

Cleaning before and after repairs

A drained-down clean is often the first step of a refurbishment: it shows the true condition of the tiles and grout so repairs can be scoped properly.

For new epoxy joints, cleaning is carried out within the product’s working window and with the wash method specified by its manufacturer, so the finished pool is handed back clean, full and even.

Cleaning before and after repairs
Good to know

Questions we are often asked

All questions
Does the pool need draining for a deep clean?

For a full clean of the floor, walls, steps and grout, yes. Waterline scale can sometimes be tackled by lowering the water instead of draining the whole pool.

Can you remove scale from pool tiles without damaging the grout?

Usually. We choose the product and method for the type of scale and the condition of the joints, and test a small area first. Where the grout is already weak, we tell you before cleaning, as a deep clean can expose it.

Will cleaning get rid of black spots in the grout?

Surface staining often comes out. Where the grout is porous or damaged and the marks are deep in the joint, cleaning alone will not fix it, and regrouting is the lasting answer.

Do you take on routine daily cleaning?

No. We carry out deep and chemical cleans during drain downs and as part of repair work. Routine daily cleaning is best handled by your own staff or a cleaning contractor.

Start with an estimate

Tell us about your pool.

Send a few details and we’ll get back to you to understand the job. Photos of the tiles, grout and problem areas help us a lot, and you can add them below.

Dan or Jay will be in touch within 24 hours.

What affects the estimate?

  • The pool area and which surfaces need work
  • Joint size and the grout or tiles involved
  • The condition of the tiles, joints and background
  • Access to the pool and the working areas
  • Preparation, cleaning and any repairs needed first
  • The programme and when the pool can close

Photos of the tiles, grout and problem areas. Large photos are made smaller before sending.

WhatsApp Dan